Description
NESCO Medical Oxygen Flowmeter JH-906A
Stable and Practical Oxygen Flow Control for Homecare and Medical Facilities
The NESCO JH-906A Medical Oxygen Flowmeter is designed to regulate and display the flow of medical oxygen from a compatible oxygen supply system. It combines an easy-to-read flow tube, adjustable control valve, and humidifier bottle to support controlled oxygen delivery in homecare and professional healthcare environments.
Available in plug-type and thread-type connections, the JH-906A provides flexible compatibility for different oxygen outlets and cylinder configurations.
Key Features
- Provides stable and adjustable medical oxygen flow
- Clear graduated flow tube for convenient monitoring
- Adjustable flow-control knob
- Integrated humidifier bottle
- Helps add moisture to oxygen before inhalation
- Strong and durable construction
- Simple, ergonomic, and practical operation
- Available with plug or threaded connection
- Suitable for compatible medical oxygen cylinders and outlets
- Designed for homecare and healthcare-facility use
Available Variants
Plug Type
Designed for connection to a compatible plug-style oxygen outlet or adapter.
Thread Type
Equipped with a threaded connector for compatible oxygen cylinders or outlet systems.
Confirm the required connector type before purchasing.
Suitable For
- Prescribed oxygen therapy at home
- Elderly patient care
- Respiratory recovery support
- Clinics and community health centres
- Hospitals and medical facilities
- Routine homecare oxygen requirements
Oxygen therapy must only be used according to the prescription or instructions of a qualified healthcare professional.
Technical Specifications
- Model: JH-906A
- Gas type: Medical oxygen
- Oxygen flow range: 1–15 L/min
- Output pressure: Approximately 4.5 bar
- Connection options: Plug type and thread type
- Humidification system: Integrated humidifier bottle
- Available adapters: Various compatible adapters may be available
Main Components
- Graduated oxygen flow tube
- Flow-adjustment control knob
- Oxygen inlet connector
- Humidifier bottle
- Oxygen outlet connection
- Internal humidifier tube
General Operating Guide
- Confirm that the flowmeter connection matches the oxygen supply outlet.
- Attach the flowmeter securely to the compatible oxygen source.
- Fill the humidifier bottle with sterile or distilled water according to the instructions and marked level.
- Close the bottle securely and connect the prescribed oxygen tubing.
- Turn on the oxygen supply.
- Adjust the flow until the indicator aligns with the prescribed flow rate.
- Check all connections for leakage before use.
Cleaning and Maintenance
Empty and clean the humidifier bottle regularly according to the product instructions and healthcare guidance. Do not overfill the bottle. Keep the flow tube upright and protect it from impact, excessive heat, oil, grease, and other contaminants.
Inspect the connector, seals, control knob, bottle, tubing, and flow indicator before each use. Do not operate the product if any component is cracked, loose, contaminated, or damaged.
Important Safety Information
Medical oxygen supports combustion. Keep the equipment away from flames, cigarettes, sparks, oils, grease, and heat sources. Do not adjust the oxygen flow beyond the rate prescribed by a healthcare professional.
Make sure the connector and working pressure are compatible with the oxygen source before installation. Setup should be performed or checked by trained personnel where required.
NESCO JH-906A Medical Oxygen Flowmeter — reliable oxygen-flow control for comfortable and practical patient care.
